A report released in June, from the security firm Dragos, describes a worrisome development by a hacker group named, “Xenotime” and at least two dangerous oil and gas intrusions and ongoing reconnaissance on United States power grids.
Multiple ICS (Industrial Control Sectors) sectors now face the XENOTIME threat; this means individual verticals – such as oil and gas, manufacturing, or electric – cannot ignore threats to other ICS entities because they are not specifically targeted.
The Dragos researchers have termed this threat proliferation as the world’s most dangerous cyberthreat since an event in 2017 where Xenotime had caused a serious operational outage at a crucial site in the Middle East.
The fact that concerns cybersecurity experts the most is that this hacking attack was a malware that chose to target the facility safety processes (SIS – safety instrumentation system).
For example, when temperatures in a reactor increase to an unsafe level, an SIS will automatically start a cooling process or immediately close a valve to prevent a safety accident. The SIS safety stems are both hardware and software that combine to protect facilities from life threatening accidents.
At this point, no one is sure who is behind Xenotime. Russia has been connected to one of the critical infrastructure attacks in the Ukraine. That attack was viewed to be the first hacker related power grid outage.
This is a “Cause for Concern” post that was published by Dragos on June 14, 2019.
“While none of the electric utility targeting events has resulted in a known, successful intrusion into victim organizations to date, the persistent attempts, and expansion in scope is cause for definite concern. XENOTIME has successfully compromised several oil and gas environments which demonstrates its ability to do so in other verticals. Specifically, XENOTIME remains one of only four threats (along with ELECTRUM, Sandworm, and the entities responsible for Stuxnet) to execute a deliberate disruptive or destructive attack.
XENOTIME is the only known entity to specifically target safety instrumented systems (SIS) for disruptive or destructive purposes. Electric utility environments are significantly different from oil and gas operations in several aspects, but electric operations still have safety and protection equipment that could be targeted with similar tradecraft. XENOTIME expressing consistent, direct interest in electric utility operations is a cause for deep concern given this adversary’s willingness to compromise process safety – and thus integrity – to fulfill its mission.
XENOTIME’s expansion to another industry vertical is emblematic of an increasingly hostile industrial threat landscape. Most observed XENOTIME activity focuses on initial information gathering and access operations necessary for follow-on ICS intrusion operations. As seen in long-running state-sponsored intrusions into US, UK, and other electric infrastructure, entities are increasingly interested in the fundamentals of ICS operations and displaying all the hallmarks associated with information and access acquisition necessary to conduct future attacks. While Dragos sees no evidence at this time indicating that XENOTIME (or any other activity group, such as ELECTRUM or ALLANITE) is capable of executing a prolonged disruptive or destructive event on electric utility operations, observed activity strongly signals adversary interest in meeting the prerequisites for doing so.”
The Siemens SITRANS P320/P420 pressure transmitters are digital pressure transmitters featuring extensive user-friendliness and high accuracy. The parameter assignment is performed using input but- tons or the HART interface.
The "Remote Safety Handling" function saves customers significant amounts of time and money, because the SIL function can be switched on and validated remotely via SIMATIC PDM. This eliminates travel times and on-site operation via the local display or keyboard.
For more information, contact Process Technology, Inc. by visiting https://process-tech.com or by calling 801-264-1114.
Compact and easy-to-deploy, SX5 Series safety laser scanners from Banner Engineering protect personnel, equipment, and mobile systems within a user-defined area. They continuously scan a 275° area to create a two-dimensional protected zone that must be crossed to reach the hazard.
Measuring, positioning, recording, and controlling are important parameters in all industries processes. That’s why process instruments need to deliver the highest levels of precision and reliability.
Siemens, a world leader in engineering and process control instruments, provides off-site and on-site calibration services that keep your plant running at optimum efficiency.
OFF-SITE CALIBRATION SERVICES
Siemens offers factory calibration services for Pressure, Temperature and Flowmeters from both our own and other manufacturers.
ON-SITE CALIBRATION SERVICES
Siemens offers on-site calibrations for Pressure, Temperature and Belt scale of our own products as well as those of other manufacturers.
This video presents the viewer with explanations and concepts for the following:
- The Siemens Process Instrument Services overview.
- A description of field instrument technologies.
- What calibration means.
- Reasons for calibrating field devices.
- The importance of calibration and verification.
- What traceability means.
- Why accreditation is needed.
- The Siemens Factory Calibration process.
- The Siemens On-site Calibration process.
- What verification means.
- Reasons for verification.
- The Siemens On-site Verification process.
For more information, visit https://process-tech.com or call 801-264-1114.
This white paper, courtesy of SIEMENS, is a look at the technology behind this popular application problem solver and what allows it to perform so well in tough conditions: heavy vapors, steam, changing physical and chemical conditions, and high temperatures and pressures.
For more information about guided wave radar level instrumentation, contact Process Technology, Inc. For immediate assistance call 801-264-1114, or visit https://process-tech.com.